ORIC A3

Related Products

• 

  Plotter FD61915E

  15 cabezales Epson I3200

  • PRINTER 15 heads
  • PRINTING SPEED 1 pass 610 m²/h
  • PRINT WIDTH 1900 mm
  • COMPATIBLE MEDIA Heat transfer paper
  • COMPATIBILITY Win 7 (64 bit) / Win 10 (64 bit)

  Maintenance

  • • Daily power-on (even if you don't print) Helps the inks circulate and prevents bubbles from forming or drying out in the heads.
    • Automatic cleaning activated Let the equipment do its maintenance cycle. Do not interrupt it: it prolongs the life of the head.
    • Keep the capping station, dampers, and wiper clean These consumables accumulate ink and lint. A weekly cleaning prevents stains and clogs.
    • Control the ambient humidity Ideal: 45%–60%. Low humidity dries the ink; high humidity generates droplets on the paper.
    • Check feed rollers and trays If they are dirty, they mark the paper or generate banding.
    • Use the equipment at least 3–4 times per week Sublimation plotters need constant ink movement.

  Max width: 1900mm

  Speed: 610 m²/h

  Media: Thermal Transfer Paper

  See more

  Request a quote
• 

  AGP 4 Printheads

  4 cabezales Epson I3200

  Maintenance

  • Dust-Free Environment Keep the work environment dust-free to prevent it from affecting printing.
  • Temperature and Humidity The machine should operate at a temperature of 25–30°C and a humidity of 40–60%.
  • Platform Cleaning Keep the entire printer tidy and clean, removing dust from friction areas.
  • Cleaning the Underside of the Printhead Move the carriage to the cleaning position, clean the underside of the printhead with a non-woven cloth dampened with cleaning fluid or distilled water, removing dirt from the printhead and surrounding areas.

  Max width: 600mm

  Speed: 23 m2/h

  Media: Pet Film 620mm

  See more

  Request a quote
• 

  Plotter UV 3040

  1 cabezal Epson I3200

  • SPEED
    0.28 m²/h - 3 m²/h

  • MEDIA
    Glass, plates, various signs, crystal...

  Maintenance

  • Daily Power On and Circulation Even if you're not printing, turn it on every day to circulate the UV ink and prevent it from hardening inside the printhead.
  • Cleaning the Wiper, Cap Station, and Surrounding Area Do this daily. UV ink is thicker and crusts up quickly, clogging the nozzles.
  • Avoid Direct Light on the Ink UV inks are cured by light. Keep the cartridges and the plotter area away from sunlight or external UV lights.
  • Nozzle Check 1–2 Times a Day UV ink tends to dry faster. You detect any cuts before they affect a job.
  • Manual printhead cleaning (only when necessary) Do this with UV cleaning solution and a lint-free cloth. Never use alcohol.
  • Proper ventilation of the work area UV inks emit fumes. A well-ventilated environment improves the life of the equipment and the health of the operator.

  Max width: 420mm

  Speed: 3 m2/h

  Media: Glass, plates, advertising signage, crystal, PVC, acrylic, synthetic leather, etc.

  See more

  Request a quote
• 

  M TU Tech

  2 cabezales Epson I3200

  Maintenance

  • Dust-Free Environment Keep the work environment dust-free to prevent it from affecting printing.
  • Temperature and Humidity The machine should operate at a temperature of 25–30°C and a humidity of 40–60%.
  • Platform Cleaning Keep the entire printer tidy and clean, removing dust from friction areas.
  • Cleaning the Underside of the Printhead Move the carriage to the cleaning position, clean the underside of the printhead with a non-woven cloth dampened with cleaning fluid or distilled water, removing dirt from the printhead and surrounding areas.

  Max width: 600mm

  Speed: 20 m2/h

  Media: Pet Film 620mm

  See more

  Request a quote