Plotter FD61915E

Related Products

• 

  FEDAR FD5194E

  4 cabezales Epson I3200

  Features

  • HIGH-PRECISION PRINT HEAD 4 Epson I3200-A1 print heads with 3200 DPI resolution and VSDT technology to improve definition, color quality, and print stability. 2-pass speed can reach up to 170 m²/h.
  • THK SILENT LINEAR GUIDE Equipped with imported Japanese THK linear guide, allowing smoother carriage movement, reducing friction and noise during high-speed printing.
  • LEADSHINE BRUSHLESS MOTOR High-precision Leadshine brushless motor, with better resolution, smaller length error margin, and more stable operation.
  • ANTI-COLLISION CARRIAGE SYSTEM Allows the head height to be adjusted according to the material used. It also features an anti-collision system on both sides of the carriage to protect the head during operation.
  • MAINTENANCE STATION WITH LIFTABLE PRINT HEAD Advanced head cleaning and moisturizing unit, easy to operate and maintain. Allows selecting automatic or manual mode.
  • INK TANK AND SUB-TANK SYSTEM Continuous supply system using tank and sub-tank, ensuring constant ink output and helping maintain print quality. Includes an alarm to remind you to refill ink in time.
  • FLUORINATED RUBBER PINCH ROLLER Imported fluororubber roller that helps prevent static electricity, reduce ink misting, and avoid wrinkles during printing.
  • INTELLIGENT TAKE-UP UNIT WITH INFLATABLE ROLLER Supports material loads of up to 1000 m, reducing roll-change frequency. Features an oscillating shaft and sensor bar to maintain constant tension during rewinding.
  • INTELLIGENT DRYER Includes an intelligent air dryer to support the printing process and improve drying performance.
  • PRINT WIDTH 1900 mm print area, ideal for large-format sublimation production.
  • COMPATIBLE MEDIA Works with transfer paper from 40 g to 100 g.
  • RIP SOFTWARE Compatible with Maintop, Photoprint, Onyx, and neoStampa.
  • COMPATIBILITY Compatible with Win 7, Win 8, and Win 10, 64-bit.

  Maintenance

  • DAILY POWER-ON, EVEN IF YOU DON'T PRINT Helps keep ink circulating and prevents bubbles from forming or ink from drying out in the heads.
  • AUTOMATIC CLEANING ACTIVATED Let the equipment run its maintenance cycle. Not interrupting it helps prolong the head's service life.
  • KEEP THE CAPPING STATION, DAMPERS, AND WIPER CLEAN These consumables can accumulate ink and lint. Weekly cleaning helps prevent stains, ink cutoffs, or clogs.
  • CONTROL AMBIENT HUMIDITY Recommended range: 45%–60%. Low humidity can dry out the ink; excessive humidity can affect the paper and print quality.
  • CHECK FEED ROLLERS AND TAKE-UP SYSTEM Keeping them clean helps prevent marks on the paper, wrinkles, or tension issues during operation.
  • USE THE EQUIPMENT FREQUENTLY Sublimation plotters need constant ink circulation. It's recommended to use the equipment at least 3–4 times per week.

  Max width: 1900mm

  Speed: 170 m²/h

  Media: Sublimation paper / transfer paper

  See more

  Request a quote
• 

  Plotter EPSON F570

  1 PrecisionCore® Micro TFP® printhead

  • INK TYPE
    Epson UltraChrome DS sublimation ink (4 colors).

  • MAX RESOLUTION
    2400 dpi x 1200 dpi.

  • DIMENSIONS (W × D × H)
    970 mm × 577 mm × 245 mm.

  • DISPLAY
    4.3-inch touchscreen LCD.

  • CONNECTIVITY
    High-speed USB 3.0, Wireless LAN (802.11 b/g/n), and Wired Ethernet (1000 Base-T / 100 Base-TX / 10 Base-T).

  Maintenance

     

  • Daily power-on (even if you don't print)
    Helps the inks circulate and prevents bubbles from forming or drying out in the heads.

     

  • Automatic cleaning activated
    Let the equipment do its maintenance cycle. Do not interrupt it: it prolongs the life of the head.

     

  • Keep the capping station, dampers, and wiper clean
    These consumables accumulate ink and lint. A weekly cleaning prevents stains and clogs.

     

  • Control the ambient humidity
    Ideal: 45%–60%. Low humidity dries the ink; high humidity generates droplets on the paper.

     

  • Check feed rollers and trays
    If they are dirty, they mark the paper or generate banding.

     

  • Use the equipment at least 3–4 times per week
    Sublimation plotters need constant ink movement.

  Max width: 620 mm (24'')

  Speed: 62 seconds (for A1/D size)

  Media: Sublimation transfer paper for textiles and rigid materials

  See more

  Request a quote
• 

  Plotter FD 5193

  3 cabezales Epson I3200

   
  •  
    • HIGH-PRECISION PRINT HEAD 3 Epson I3200-A1 print heads, 2-pass speed can reach up to 120㎡/h.
     
    • ADVANCED CAPPING STATION Equipped with an advanced intelligent automatic print head cleaning and moisturizing device, which can pump ink well and maintain fluent ink flow.
     
    • INTELLIGENT LACK OF INK ALARM Reduces the tediousness of frequently checking the remaining ink quantity, and at the same time, reminds you to add ink in time to ensure the continuity of the printing job.
     
    • INTELLIGENT MIST PRINTING AND VSDT PRINTING The unique intelligent two-dimensional mist and wave-mist function, and VSDT variable droplet technology, obviously improve the printing quality.
     
    • STABLE MEDIA FEEDING AND TAKE-UP SYSTEM Convenient and fast, printing media is quickly stored, equipped with automatic paper measurement and anti-rubbing function; if consumables are deformed, the printing automatically stops to prevent scratching the print head.
     
    • WIDE APPLICATION With the help of the heat transfer machine, the printed images can be transferred to many different non-elastic materials, such as polyester, chiffon, silk, and flags. There is no limit to the patterns, making it a good choice in the field of decoration, clothing, and advertising.
     
    • SPECIALLY DESIGNED CARRIAGE The position of the print head can be adjusted according to different printing media and anti-collision devices on both ends to give the print head more comprehensive safety protection.
     
    • THK SILENCE GUIDE RAIL Using the imported Japanese THK silent linear guide rail to effectively reduce resistance and noise during the printer's operation.
     
    • LARGE CAPACITY INK TANKS Four units of 3L large-capacity ink tanks provide ink independently and continuously, ensuring the long-term continuity of ink output.
     
    • INTELLIGENT HOT AIR DRYER The intelligent integrated air and heat dryer, two-stage heating, middle hot air, and intelligent start-stop technology ensure drying performance and greater energy savings at the same time.
     
    • LEADSHINE CHINESE MOTOR The Leadshine two-way brushless motor has higher precision, smaller length error, and more stable performance.
     
    • IGUS INK CHAIN FROM GERMANY High-quality IGUS ink chain imported from Germany, to ensure the good completion of the printing work.
     
    • FLUORINATED RUBBER PINCH ROLLER The US fluorinated rubber pinch roller prevents static electricity from flying ink, prints more accurately, and avoids wrinkles.
     
    • TWO-LEVEL INK SUPPLY SYSTEM Adopts a two-level ink supply system that allows continuous printing for a long time to ensure the image output quality.
     
    • COMPATIBILITY Win 7 / Win 8 / Win 10.

  Maintenance

   
  •  
    • Daily power-on (even if you don't print) Helps the inks circulate and prevents bubbles from forming or drying out in the heads.
     
    • Automatic cleaning activated Let the equipment do its maintenance cycle. Do not interrupt it: it prolongs the life of the head.
     
    • Keep the capping station, dampers, and wiper clean These consumables accumulate ink and lint. A weekly cleaning prevents stains and clogs.
     
    • Control the ambient humidity Ideal: 45%–60%. Low humidity dries the ink; high humidity generates droplets on the paper.
     
    • Check feed rollers and trays If they are dirty, they mark the paper or generate banding.
     
    • Use the equipment at least 3–4 times per week Sublimation plotters need constant ink movement.

  Max width: 1900mm

  Speed: 120 m²/h

  Media: Transfer paper

  See more

  Request a quote
• 

  DTF UV (30cm)

  3 Epson I1600 printheads

  Maintenance

  • Daily power-on and circulation Even if you don't print, turn it on every day so the UV ink circulates and to prevent it from hardening inside the printhead.
  • Cleaning of the wiper, cap station, and surrounding areas Do this daily. UV ink is thicker and forms crusts quickly, which clogs the nozzles.
  • Avoid direct light on the ink UV inks cure with light. Keep cartridges and the plotter area away from direct sunlight or external UV lights.
  • Nozzle test 1–2 times per day UV ink tends to dry faster. This detects any clogs before they affect a job.
  • Manual cleaning of the printhead (only when necessary) Do it with UV cleaning solution and a lint-free cloth. Never use alcohol.
  • Adequate ventilation of the work area UV inks emit vapors. A ventilated environment improves equipment lifespan and operator health.

  Max width: 300mm

  Speed: 7 m2/h

  Media: Film A (with adhesive) + B

  See more

  Request a quote